LYRA SKALA L.E.

Codice prodotto UST0119
Categoria TESTINE
Marca LYRA
Disponibilità si
Allegati:

Presentazione

Segnala ad un amico

Altre domande ?

 

Assolutamente perfetta POCHE ORE, versione in edizione limitata con base in legno duro

confezione originale

 

Specifications:

  • Designer: Jonathan Carr
  • Builder: Yoshinori Mishima
  • Type: Medium weight, medium compliance, low-impedance moving coil cartridge
  • Stylus: Lyra-designed long-footprint variable-radius line-contact nude diamond (3μm× 70μm), slot-mounted
  • Cantilever system: solid boron rod with short one-point wire suspension, directly mounted into cartridge body via high pressure knife-edge system
  • Coils: single layer, 6 N high-purity copper, chemically-purified high-purity iron cross-shaped former, 5.4 ohm self-impedance, 9.1μH inductance
  • Output voltage: 0.5mV@5 cm/sec.
  • Frequency range: 10 Hz〜50 kHz
  • Channel separation: 35 dB or better at 1 kHz
  • Compliance: Approx. 12× 10 cm/dyne at 100 Hz
  • Vertical tracking angle: 20 degrees
  • Cartridge mounting screws: 2.6 mm 0.45 pitch JIS standard
  • Cartridge weight (without stylus cover): 11.6 g
  • Distance from mounting holes to stylus tip: 9 mm
  • Recommended tracking force: 1.65〜1.75 g (1.72 g recommended)
  • Recommended load directly into MC phono input: Determine by listeing 
  • Recommended load via step-up transformer: 5〜150 ohm (connect step-up transformer’s output to 10kohm〜47kohm MM-level RIAA input, preferably via short, low capacitance cable)
  • Recommended tonearm: High-quality pivoted or linear (tangential) tonearm with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment

Gli utenti registrati possono condividere la loro esperienza avuta con questo prodotto/servizio. Registrati per accedere a tutti i benefici riservati agli utenti registrati o clicca su login se sei già registrato.